Sale!
  • Ultraset-2in1-26kg
  • Timber-Flooring-Adhesive

Ultraset 2 in 1 (26kg)

Adhesive + Moisture Barrier

$289

$309 per box (1 m2)

Bostik Ultraset® 2 in 1 is a high performance hardwood flooring adhesive and moisture control membrane all in one.

In stock

Quantity (m2)

Add 10% for wastage

Delivery EstimateWe Deliver Australia Wide

Delivery Postcode

Quantity (Box)

SKU: Ultraset-2in1-26kg Category: Tags: ,

Description

Ultraset 2 in 1 (26kg)

FREE DELIVERY (* min order, 4 pales)

 

>>>BROCHURE/TDS<<<

 

Bostik Item Code: 30608841

 

Bostik Ultraset® 2 in 1 is a high performance hardwood flooring adhesive and moisture control membrane all in one.

With Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology, Ultraset® 2 in 1 maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure.

Bostik Ultraset® 2 in 1 has zero VOC’s (as calculated per SCAQMD Rule 1168) and does not contain any water.

 

  • 2 in 1 product: flooring adhesive and moisture vapor control

  • Easy clean before and after cure

  • Lifetime warranty for unlimited moisture vapor protection

  • Superior bond strength & green grab

  • Anti-fracture performance; can bridge cracks up to 1/8″ (3mm)

  • Zero VOC content

  • No restriction on board length or width

  • Blockade® Anti-microbial protection

 

Ultraset 2 in 1®   |  Uses:

Ultraset® 2 in 1 adheres to all the most common substrates used in hardwood flooring installation, with no restrictions on board width or length.

It may be used over all properly prepared substrates common to hardwood flooring installations.

 

Additional Information:

Ultraset 2 in 1® hardwood flooring adhesive has extremely low moisture vapor permeability, and is not adversely affected by moisture. As a result, costly and time consuming concrete moisture testing is not required when the slab is properly prepared, dry to the touch, and fully cured.

The elastomeric characteristics of Ultraset 2 in 1® establish an anti-fracture membrane that can bridge cracks up to 1/8″ (3mm), which can occur in the substrate prior to or after installation. This superior elasticity allows Ultraset 2 in 1® adhesive to move with the wood as it expands and contracts with changes in humidity and temperature over the life of the floor.

Bostik Ultraset 2 in 1® has no restrictions on board width or length. It may be used over all properly prepared substrates common to hardwood flooring installations.

 

 

You may also like…